Guide :Home Security : 4 Channel Dvr

SHR 1040 "Froze Up"

All 4 of the LED lights are on and I am unable use the recorder. "No Signal" appears on the screen and the manual lists no troubleshooting tips or fixes. I have tried unplugging the recorder for minutes and hours at a time and it makes no difference. Any ideas out there?

Research, Knowledge and Information :


Samsung SHR-1040K User Manual. ... DIGITAL VIDEO RECORDER SHR-1040/SHR-1040K User’s Manual English ... When you press the up/down and the left/right key in the ...
Read More At :

Samsung SHR-1040K : Digital Video Recorder User's Manual

Get Samsung SHR-1040K Digital Video ... SHR-1040/SHR -1040K-ENG 2006.4. ... can view X2 screen by pressing the ZOOM Button inthe single screen.When you press the up ...
Read More At :

Samsung SHR-1040K User Manual: Zoom Key; Freeze Key

Samsung SHR-1040K Manual Online: Zoom Key, Freeze Key. G The ZOOM Key Is Used To X2 Zoom The Selected Area In 1CH Mode. G Press The ZOOM Key To Display The...
Read More At :

SHR-1040 - Samsung

Sign up for a Samsung account today and gain access to trade-ins, Samsung financing, ... SHR-1040 SHR-1040 Warranty. Back to Top. Shop Products .
Read More At :

Samsung SHR-1040K HDD DVR 4-camera Security System ...

Shop for Samsung SHR-1040K HDD DVR 4-camera Security System. ... Sequence, Freeze, Zoom, and PIP ... We will issue a partial refund of up to 70 percent if ...
Read More At :

Solve Samsung SHR-1040 problem - videos, documents

Mid fight between SHR corn and SSW PawN where they both try to predict each others flashes and end up trading ... AC Adapter For SAMSUNG SHR-1040 Real Time DVR ...
Read More At : Customer reviews: Samsung SHR-1040 Digital Video ...

Find helpful customer reviews and review ratings for Samsung SHR-1040 Digital Video Security System DVR-4 Channel up to 160GB at Read honest and unbiased ...

Samsung Shr-1040k Dvr Manual - Scribd

DIGITAL VIDEO RECORDERSHR-1040/SHR-1040K User’s Manual ... Upon Access to HDD. 3 and 4 in sequence when the up/down or ... Documents Similar To Samsung Shr ...
Read More At :

Suggested Questions And Answer :

SHR 1040 "Froze Up"

Same issue here, all four lights on front panel remain lit. It seems to fail the CMOS start up test. Tried using the RESET button inside the unit on the mainboard, it blinks the lights but they remain on. Tried the white switch on the mainboard which made the Alarm and Record lights go out, but unit still does not function. Removed the CMOS battery and did the same RESET. No joy. All four lights come on immediately once plugged in. All three internal status LED's are on indicating working components. At a loss at this point and disappointed because this product has never worked quite right. At least now we know why it was half the cost of other DVR's.
Read More At : 4 Channel Dvr...

Manual for shr-2040 in english - Samsung SHR-2042 4 Channel Stand Alone Dvr with Cdrw

My unit went off and now all that comes on is the Blue light in the front. When I try to reload the software the message I receive is my monitor has to be set at 1024 x 768 or higher and it already is and it won't reload the software, can anyone help?
Read More At : SHR-2042 4 Channel Stand Alone Dvr with Cdrw...

I can't configure my Samsung SHR-1041 for remote

It depends on the router you are using but you should be able to open the dvr in your router to get through your firewall.
Read More At : 4 Channel Dvr...

Samsung SHR-1041K. Cannot connect to DVR system "Unknown Error"

Samsung 1041k DVR - Camera Web Server Solutions. ' UNKNOWN ERROR' OR 'CANNOT CONNECT TO SERVER'Holy Smokes! Can't anyone write a simple solution? The manual totally sucks. It tells you everything except the details that will complete the puzzle. The answers here, so far, are written by gearheads who can't write an easy sentence.. 1. The user name is case-sensitive. So if you program the DVR with a user name it will only take capital letters by default ... so when entering the user name (USER ID) in the web setup ... It MUST BE CAPITAL LETTERS otherwise you will get an 'unknown error'. There is no mention of this important little fact anywhere....2. Use Internet Explorer ONLY (becase of old Active X controls), not FireFox, Chrome, or Safari...etc...etc. IE9 doesn't like it either .. just goes white for the most part or flickers IE8 seems to work best.3: When programming the DVR Box using the MENU button and the 'NETWORK OPTION ...Use Port 6100 in the NET CLIENT PORT. In the WEB SERVER PORT use port 80. The difference is ... port 6100 is used for the basic connection of the network to the DVR device and camera hardware and software ..... and port 80 is for viewing through Internet Explorer. (Port forwarding in the router must direct those ports right back to the IP address of the DVR (whatever you set it to). TCP and UDP together work just fine... not necessarily one or the other . I tried it both ways .. they all work.4. If you are lucky enough to finally get Internet Explorer to hit the DVR software via the correct IP address and port of the DVR.... then it will prompt you to install the Active X control software embedded in the DVR. You might hae to refresh the screen a couple of times for it to download and install. If indeed it does then you will get a blank box that will wait for you figure out you need to click on a little wrench to configure the DVR connection. Add the DVR (give it a name). Enter the IP address it was configured with .... and set the port to 6100. Remember to capitalize the User Id and put in the password and save .. Completely IGNORE the confusing little matrix boxes that are used for setting up multiple DVRs and cameras. Save the setup, it wil take you back to the blank Samsung box interface and wait till you figure out to hit the connect button in the center. If you did it all correctly then you should connect to the camera views.. 4. If you are going to view the cameras from the home network .... then enter the IP address assigned to the DVR PRECEEDED by http:// . Believe it or not it seems to make a difference. If you are viewing from ..say .. your work.. put in the numerical address of your home IP address and if you have the port forwarding set up correctly you will be forwarded directly to the DVR camera software where you can sign in and see the screens.I have set up many, many IP cameras and various DVRs and software packages professionally.. I must say that this DVR and software is not very intuitive and was very difficult to get past some of the issues. The included instructions were of little help. I hope this helps somebody else.Gary
Read More At : 4 Channel Dvr...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0493 seconds