Guide :Home Security : 4 Channel Dvr

Samsung SHR-1040 O/S and Video format/file

Are you able to remove the HHD from the DVR and save the video on a PC for viewing later. I have been able to connect the HHD as an external drive (via USB) to the PC, but I'm unable to access the drive. I assume that the unit formats the drive and then partitions the drive placing some type of O/S on the smaller partition and MPEG-4 video on the larger partition. Drive shows up in the disk drive of device Mgr and also in the Computer Management area (Disk Management). Both partitions show as Healthy, but as Unknown Partitions. However, it does not show up in my computer as a drive. Bottom li

Research, Knowledge and Information :


SAMSUNG SHR-1040K USER MANUAL Pdf Download.


View and Download Samsung SHR-1040K user manual online. Samsung ... DIGITAL VIDEO RECORDER SHR-1040/SHR-1040K User’s ... and audio data in installed HDD format, ...
Read More At : www.manualslib.com...

Amazon.com: Customer reviews: Samsung SHR-1040 Digital Video ...


Find helpful customer reviews and review ratings for Samsung SHR-1040 Digital Video Security System DVR-4 Channel up ... The DVR uses good file compression ...

Samsung SHR-1040K HDD DVR 4-camera Security System ...


Shop for Samsung SHR-1040K HDD DVR 4-camera Security System. ... File Cabinets; ... Samsung 8 Channel 1080 Full HD HD Video Security System with 4 Outdoor Cameras ...
Read More At : www.overstock.com...

SAMSUNG SHR-1040K Security/Surveillance Equipment-Newegg.com


SAMSUNG SHR-1040K SAMSUNG 4CH Real-Time DVR w/4 Cameras & 160GB HDD Security ... Video REC/PB Speed: 120ips Video ... REC File Size: High: 14Kb, Normal: ...
Read More At : www.newegg.com...

Samsung SHR-1040K User Manual: Product Specification


... SHR-1040, SHR-1040K Block Video Audio REC/Play /Searching Alarm/Motion Remocon ... Signal Format. Video ... Samsung digital video recorder user's manual ...
Read More At : www.manualslib.com...

Samsung Shr-1040k Dvr Manual | Camera | Digital Video Recorder


REC File Size Low : ... SHR-1040K Block Function Signal Format Video Input Video output SHR-1040 SHR-1040K ... Documents Similar To Samsung Shr-1040k Dvr Manual
Read More At : www.scribd.com...

Samsung SHR-1040K user manual - ManualsBase.com


If looking through the Samsung SHR-1040K user manual ... It records and plays back each channel of video data in MPEG4 format, ... SHR-1040 User’s Manual Adapter ...
Read More At : www.manualsbase.com...

Samsung digital video recorder shr-1040 manual


Samsung digital video recorder shr-1040 manual ,Samsung digital ... you to download videos, applications, photos and music files with a ... to video file , ...
Read More At : samsung.brothersoft.com...

DVR SHR-1010(P) - Mrs Ball’s


small file transfer. Utilizing M-JPEG, SHR-1010(P) ... SHR-1010(P) SHR-3010(P ... Low Cost Single Channel Digital Video Recorder Samsung single channel digital video ...
Read More At : www.elvey.co.za...

Samsung Digital Video Recorders | eBay


Shop from the world's largest selection and best deals for Samsung Digital Video ... SAMSUNG SMT-190DN SHR-1040 SMO-150QN ... event lists and log file ...

Suggested Questions And Answer :


Samsung SHR-1040 O/S and Video format/file


The only way to do this is to directly back up the video to your pc from the unit. mj
Read More At : 4 Channel Dvr...

I have the SHR-1041 Samsung DVR, since the moment I installed it, I can't record anything, there is a message everytime I turn on the system: "CHECK YOUR DISK" and when I try to record video, this message appears: "THERE IS NO DISK" I can see the video and everything else, but it won't record... I don't know if I have to add to the system another Disk Drive, but I know that the capacity of the DVR is from 250-500MB of storage, Would somebody help me? Thanks


The check your disc message does not look good if the disk is indeed the HDD of the device. It means the hard drive cannot be recognized which is probably due a crash or something. Since the unit is new I would run to the store and get a replacement.It is not possible to correct this problem yourself as the drive does not use regular file systems that you use on windows or mac but somekind of encrypted file system.
Read More At : 4 Channel Dvr...

Samsung SHR-1040 Won't Initialize


Try to reset the unit and start over.•Factory Reset Hidden Key : Mode Key + CH 2 •The Password and all setting value will return to the initial default value. •Default Password is ‘4321’ . mj
Read More At : SHR-2082 8 Channel Stand Alone Dvr with Cdrw...

Samsung SHR-1040 Digital Video Recorder


It sound like the system is locked up or your hard drive is going bad. write down all the info on the unit and reset and reprogram the unit. this may solve your problem if not you my need to send it in for repair.•Factory Reset Hidden Key : Mode Key + CH 2 •The Password and all setting value will return to the initial default value. •Default Password is ‘4321’ . mj
Read More At : SHR-2082 8 Channel Stand Alone Dvr with Cdrw...

Starts recording then stops


The manual says that it can be replaced with almost any standard IDE drive but mine has a Seagate 160GB drive in it so may want to stick with original equipment. Other than tha, any drive SHOULD work.
Read More At : 4 Channel Dvr...

BNC video output on SAMSUNG SHR-1041K


You are going to need a RF-Converter.Most come with a 65db or more built in amp.This is your best bet if you got an existing RF network.The other method is a video splitter and run a separate video feed to each tv's video input.I just use a BNC "T" on mine
Read More At : 4 Channel Dvr...

Samsung SHR-1041K. Cannot connect to DVR system "Unknown Error"


Samsung 1041k DVR - Camera Web Server Solutions. ' UNKNOWN ERROR' OR 'CANNOT CONNECT TO SERVER'Holy Smokes! Can't anyone write a simple solution? The manual totally sucks. It tells you everything except the details that will complete the puzzle. The answers here, so far, are written by gearheads who can't write an easy sentence.. 1. The user name is case-sensitive. So if you program the DVR with a user name it will only take capital letters by default ... so when entering the user name (USER ID) in the web setup ... It MUST BE CAPITAL LETTERS otherwise you will get an 'unknown error'. There is no mention of this important little fact anywhere....2. Use Internet Explorer ONLY (becase of old Active X controls), not FireFox, Chrome, or Safari...etc...etc. IE9 doesn't like it either .. just goes white for the most part or flickers ..so IE8 seems to work best.3: When programming the DVR Box using the MENU button and the 'NETWORK OPTION ...Use Port 6100 in the NET CLIENT PORT. In the WEB SERVER PORT use port 80. The difference is ... port 6100 is used for the basic connection of the network to the DVR device and camera hardware and software ..... and port 80 is for viewing through Internet Explorer. (Port forwarding in the router must direct those ports right back to the IP address of the DVR (whatever you set it to). TCP and UDP together work just fine... not necessarily one or the other . I tried it both ways .. they all work.4. If you are lucky enough to finally get Internet Explorer to hit the DVR software via the correct IP address and port of the DVR.... then it will prompt you to install the Active X control software embedded in the DVR. You might hae to refresh the screen a couple of times for it to download and install. If indeed it does then you will get a blank box that will wait for you figure out you need to click on a little wrench to configure the DVR connection. Add the DVR (give it a name). Enter the IP address it was configured with .... and set the port to 6100. Remember to capitalize the User Id and put in the password and save .. Completely IGNORE the confusing little matrix boxes that are used for setting up multiple DVRs and cameras. Save the setup, it wil take you back to the blank Samsung box interface and wait till you figure out to hit the connect button in the center. If you did it all correctly then you should connect to the camera views.. 4. If you are going to view the cameras from the home network .... then enter the IP address assigned to the DVR PRECEEDED by http:// . Believe it or not it seems to make a difference. If you are viewing from ..say .. your work.. put in the numerical address of your home IP address and if you have the port forwarding set up correctly you will be forwarded directly to the DVR camera software where you can sign in and see the screens.I have set up many, many IP cameras and various DVRs and software packages professionally.. I must say that this DVR and software is not very intuitive and was very difficult to get past some of the issues. The included instructions were of little help. I hope this helps somebody else.Gary
Read More At : 4 Channel Dvr...

Trying to get hooked up


I made a hook up from the shr 1040 to a pc monitor using a VGA converter box. Cost less then 40 ( check amazon) and simple to use as well as still use your pc on your monitor,
Read More At : 4 Channel Dvr...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || home-security-101.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0325 seconds