Guide :Home Security : 4 Channel Dvr

Starts recording then stops

I have a Samsung SHR-1040 DVR. I am having problems getting the system to record. I can hit record and the light comes on and says it is recording but then it immediately stops recording. I can see the video but it shows hdd no. Any suggestions or can I replace the HDD with a standard ide hdd.

Research, Knowledge and Information :


camera starts recording on and only stops when Motion stops


camera starts recording on and only stops when ... If you could just make it so that the camera starts recording on motion and doesn't ... then I'd finally ...
Read More At : community.netgear.com...

camera starts recording on and only stops when ... - Netgear


camera starts recording on and only stops when Motion stops ... Arlo starts up again and then records 30 seconds of the driver already walking away after dropping the ...
Read More At : community.netgear.com...

Fraps stops recording after a minute | EncodingTalk.com


I'm aware that Fraps starts recording a new file, ... then I would do a clean install of your previous version, ... Fraps stops recording after a minute or so.
Read More At : encodingtalk.com...

Audio stops and starts while viewing a video - Microsoft ...


original title: vedio starts with sound then stops for 3 sec. then starts againstops starts etc. viedo starts playing with sound then veido stops for about 4 sec.then ...
Read More At : answers.microsoft.com...

GoPro HD Hero 3 Black Edition Intermittently stops recording ...


Jun 15, 2013 · GoPro HD Hero 3 Black Edition Intermittently stops recording fix Buffman - R.A.N.G.E. ... GOPRO HERO 3 STOPS RECORDING "ALTERNATIVE SOLUTION ...

Gopro stops recording after 10 seconds | DJI Phantom Drone Forum


H3-3d gopro hero 3 Starts recording but then stops after about 10 sec. It doesn't shut off it just stops recording. Gopro works fine when not attached...
Read More At : phantompilots.com...

Re: camera starts recording on and only stops when ...


It still records and then shuts off then records again and shuts off all while the same ... camera starts recording on and only stops when Motion stops. Mark as ...
Read More At : forum1.netgear.com...

GoPro Hero 3 stops recording and immediately starts recording ...


GoPro Hero 3 stops recording and immediately starts recording again. Hello, ... (it maybe the 4 GB you refer to) then the camera stops recording.
Read More At : www.goproforums.com...

Audio starts and stops - Audio - Audio - Tom's Guide


... YouTube if I watch in full screen the audio starts and stops if I ... Fan on Dell latitude starts then stops and ... I push record again and it starts recording ...
Read More At : www.tomsguide.com...

Video recording sporadically stops | DJI FORUM


Video recording sporadically stops. ... I have to land the phantom and then turn it off and ... video recording stops and the app starts to switch between ...
Read More At : forum.dji.com...

Suggested Questions And Answer :


Dish changing channel to new recording while watching *pre-recorded* program


Rjvdw,Try unplugging the receiver for 10 seconds then plugging it back in, and see if the problem is resolved. The receiver should only switch if you are watching live TV instead of a recording.If the problem persists, and you are for sure not on Live TV, the receiver may need to be replaced. If it continues you can send me an email at [email protected], and I can assist you further!Tommy FaustDISH Internet Response Team
Read More At : 54 1 Ir Vip 622 722 Dvr Remote 222...

Starts recording then stops


The manual says that it can be replaced with almost any standard IDE drive but mine has a Seagate 160GB drive in it so may want to stick with original equipment. Other than tha, any drive SHOULD work.
Read More At : 4 Channel Dvr...

Samsung SHR-1040 Digital Video Recorder


It sound like the system is locked up or your hard drive is going bad. write down all the info on the unit and reset and reprogram the unit. this may solve your problem if not you my need to send it in for repair.•Factory Reset Hidden Key : Mode Key + CH 2 •The Password and all setting value will return to the initial default value. •Default Password is ‘4321’ . mj
Read More At : SHR-2082 8 Channel Stand Alone Dvr with Cdrw...

Deleting vido files from hard drive


For this you will have to transfer the particular video into ur pc.. Then you can edit the video like how ever you want. you can usw sony vegas software for this.http://www.covisec.com/product/SHR-2042/SAMSUNG_SHR2042_4_CHANNEL_DVR_STAND_ALONE_DIGITAL_VIDEO_RECORDER_TRIPLEX_250_GB.htmlthis is the manual for ur product
Read More At : SHR-2042 4 Channel Stand Alone Dvr with Cdrw...

How to stop recording,without killing the power?


My record lock is turn off, but every time I press the record stop to stop record it takes me to the password screen where I must enter a password before I can stop the recording....This piece of xxxxx is stink. I hate my Samsung SHR-1040...I cant even talk to Samsung about it.....When I call, they transfer me to India and they dont even know what a DVR is......I told them DVR 10 times, but they keep repeating to me " VCR"
Read More At : 4 Channel Dvr...

HOW DO I GET MOTION DETECTION TO WORK?


Are you sure the cameras are capable of motion sensing and make sure that you do not need an additional control cable to the camera to make that work.
Read More At : First Alert...

SHR-1040 - rewind from end of footage??


I'm wondering if the firmware can be upgraded as that might be the easiest thing. My other thought was that putting the hard drive into a PC and trying to view the video might be a way to see it.
Read More At : 4 Channel Dvr...

Bunker Hill security 8-Channel Surveillance DVR item#61229 keeps rebooting itself. "system initializing"


Rotorway Bunker Hill never lasts and it's the cheapest one with the worst resolution you just don't want to operate and put your life on the line with this unit
Read More At : Home Security...

I have a 16 channel dvr, tf 960H hd d1 dvr, it just stop recording, nothing wrong with harddrive, settings setup to record, but still doesn't want to record.


What's the status of the HDD? Enter Menu > HDD > General. The HDD status should be either "Normal" or "Sleeping", if there´s a problem you may get "Uninitialized" or "Abnormal", so you will need a new HDD, and you may need to initialize it before use. You can find a complete manual at http://files.cctvstar.com/download/User_Manual_of_True960H_DVR(V1.0).pdf
Read More At : Home Security...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || home-security-101.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0437 seconds