Guide :Home Security : Weatherproof Color Day/Night Camera with 30 IR Leds...

Video I installed 4 lorex cctv cameras but only 1 has video I cant seem to get video on three of the cameras. I can see they get power because the LED lights turn red but I get no video. I have been testing them with an old monitor so i have to do them one at a time. I had installed them before the huricane but i had no power supply for them so i just had them hooked up outside but not in side I don't know if you can help me, but iwould be very greatfull if you could

Posted by mfragoso on Oct 19, 2008

Research, Knowledge and Information :



We did not find results for: video i installed 4 lorex cctv cameras but only 1 has video i cant seem to get video on three of the cameras i can see they get power because the led lights turn red but i get no video i have been testing them with an old monitor so i have to do them one at a time i had installed them before the huricane but i had no power supply for them so i just had them hooked up outside but not in side i don t know if you can help me but iwould be very greatfull if you could.

Suggested Questions And Answer :


Video I installed 4 lorex cctv cameras but only 1 has video I cant seem to get video on three of the cameras. I can see they get power because the LED lights turn red but I get no video. I have been testing them with an old monitor so i have to do them one at a time. I had installed them before the huricane but i had no power supply for them so i just had them hooked up outside but not in side I don't know if you can help me, but iwould be very greatfull if you could


I HAVE NO INSTRUTIONS FOR MY MICROMARK MM23283 SO DONT KNOW HOW TO SET UP PLEASE TELL ME
Read More At : Weatherproof Color Day/Night Camera with 30 IR Leds......

We are not able to get our Samsung SCC-C4335 zoom cameras to zoom after installing the Hubway163DI on a DVR with 2x GV-1480 cards running o/s 8.4. What do we need to do to make it work? We have a GV net card we are connecting the output of the Hubway to & we can see the cameras, but not let them zoom.


Well, it might seem like a simple solution but.......Have you checked to make sure the Data+ and Data- aren't reversed? If they were, or if they weren't even hooked up either at the hubway or the cameras, everything but the zoom (and tilt pan if they had it) would work.
Read More At : Hubway Hubway162d Utp Power Video Balun Hub...

I connected it correctly and got no pic on my tv, the red light was on the cam, why dont i get a picture on my tv?


I would say if you are getting no picture Lets assume that the rca connection cables are not broken then that your tv is ntsc even is the signals were mixed you would get something therefore only thing left is that the resolution of the signals your camera must output i higher resolution or aspects ratio than your tv can accommodate checking the setting of the camera go to the lowest resolution
Read More At : Night Vision Camera w/ 100 ft cable - Security Cameras...

SCC-343P Security camera cant get video out


I would check the iris on the camera, if it's all the way open, then it's probably not the fault of the camera. What are you using to view the image? Rob
Read More At : Home Security...

My Pelco Spectra 2 Camera gets power, but has no video.


The system fan is what you should be looking at. It is overheating and in turn shuts off the video output.
Read More At : Pelco...

Micromark wiring diagram


Hi have the same issue found it to be red power black negative yellow video white audio and bare wire is the shared ground for the yellow and white hope this helps
Read More At : DVR4-Pro-Net 4-Channel Security System with 8.4" Monitor...

Samsung SHR-1040 Won't Initialize


Try to reset the unit and start over.•Factory Reset Hidden Key : Mode Key + CH 2 •The Password and all setting value will return to the initial default value. •Default Password is ‘4321’ . mj
Read More At : SHR-2082 8 Channel Stand Alone Dvr with Cdrw...

SECURITY CAMERA SYSTEMI


Have you setup a Virtual Server within the D-Link router? This should be on the ADVANCED tab in the D-Links Admin Configuration interface. Upon setup, the router should allow pass through of your request to the network connected device. You will need the following in this configuration: Name of device: SSC21WEB (or whatever the name of your device is) IP Address: 192.168.0.101 Protocol Type: TCP Public/Private Port: 10000 - 65535 Schedule: Always Good Luck...
Read More At : SSC DVR Digital Video Recorder with 80 Gb Removable Hard......

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || home-security-101.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0468 seconds